Всички категории
EN

Свързване на дупето

Полиетиленов тръбен монтаж PE Коляно огъване 45 ° за студена вода и дренаж

Материал: 100% девствена суровина
Размер: dn63mm-dn800mm (външен диаметър) 
Налягане: SDR17 PN10, SDR13.6 PN12.5, SDR11 PN16
Срок на експлоатация: 50 години за нормална употреба
Срок на доставка: Налични за нормални размери
Време за производство: 7-10 дни за 20 футов контейнер, 10-15 дни за 40 футов контейнер.
Зареждане Port:Нингбо или Шанхай, Китай


  • Бърз детайл
  • Описание
  • Приложения
  • Характеристики
  • конкурентно предимство
  • Разследване
Минимално количество за поръчка: Договаряне
Цена: Договаряне
Опаковки Детайли: ПП тъкана торба
Време за доставка: В 7 дни
Условия за плащане: 30% депозит за производство, 70% баланс, който трябва да се плати преди изпращане.
Доставка умение: 100Tons / месец
Налични проби  Yes, free samples available for small size. 
Customized Logo available For small quantity of order, customer logo can be marked on the fittings by laser marking or sticker.
(OEM Service) For big quantity of order, customer logo can be embossed on the fittings.
FOB loading port  Нингбо или Шанхай, Китай 
Място на произход  Нингбо, Китай 

● Material: 100% new raw material.

● Working pressure: SDR17, SDR13.6, SDR11,PN10, PN12.5, PN16.

● Size: dn63mm to dn800mm.

● Color: Black or customized.

● Usage: Water supply,sewage transfer, covering cable and so on.

● Service Life: More than 50 years under normal environment.

Dписание

● Безплатна проба
● Custom made as your request
● Quality guarantee
● OEM is ok

AРИЛОЖЕНИЯ

Водоснабдителна система

● Transportation and distribution system.

● House service connection.

● Agricultural irrigation.

Sспецификации на
Име на продукта Спецификация (мм) SDR17 SDR13.6 SDR11
HDPE Butt Fusion 45 Degree Elbow

(HDPE 45 Degree Elbow)

1s

63
75
90
110
125
140
160
180
200
225
250
280
315
355
400
450
500
560
630
710

800


Cомпетивно предимство

● Non-toxic: HDPE pipe material is nontoxic and tasteless pipe which belongs to green building materials. No heavy metal additives would not be covered with dirt or contaminated by bacterium.

● Lower Installation Costs:light weight and ease of installation can reduce installation costs by as much as 33% over metal piping system.


Стъпки за инсталиране

● In the butt fusion of HDPE pipes, a special fusion device is used, butt fusion welding machine.

● Clean the ends of pipe and fitting, to make sure pipe and fitting are completely clean and free of waste.

● Fix the pipe and fitting in the welding machine, cut the both end of the pipe and fitting, to make sure two ends of pipe and fitting are completely flat and free of defects. Please pay attention on no gap between two ends.
● After finishing above steps, the operator put the heating plate between the two simple pipes’ (or fitting’)ends and bring the pipes ends to the metal plate gradually, so that the ends melt. Most important, before connect the power, please make sure the heating plate is completely clean.

● After end of pipes or fittings melt enough, it’s necessary to remove the heating plate from the pipes or fittings, and within 10 seconds to connect two end slowly and carefully, don’t move until the solid connection build.

Iзапитване